1 files changed, 152 insertions, 0 deletions

diff --git a/sshd_config b/sshd_config
new file mode 100644
index 0000000..a67aa8a
--- /dev/null
+++ b/sshd_config
@@ -0,0 +1,152 @@
+#       $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Minimum accepted size of the DH parameter p. By default this is set to 1024
+# to maintain compatibility with RFC4419, but should be set higher.
+# Upstream default is identical to setting this to 2048.
+#KexDHMin 1024
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile      .ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange no
+
+# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
+# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
+# in this release. The use of 'gssapi' is deprecated due to the presence of 
+# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
+#GSSAPIEnableMITMAttack no
+ 
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+UsePrivilegeSeparation sandbox          # Default for new installations.
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem       sftp    /usr/lib/ssh/sftp-server
+
+# This enables accepting locale enviroment variables LC_* LANG, see sshd_config(5).
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#       X11Forwarding no
+#       AllowTcpForwarding no
+#       PermitTTY no
+#       ForceCommand cvs server